Polyaspartic coating is a protective layer for concrete garage flooring. It is a type of polyurea floor coating, which is UV-resistant, anti-corrosive, and impressively durable.
One of the original uses for polyurea was in construction and oil industry, as well as in spray-on applications like truck bed liners. Today, you can get polyaspartic coatings specifically formulated for high-traffic floors, such as those in your garage.
If you are considering this material for your garage, you may be wondering: how much does polyaspartic floor coating cost? Find out the answer to this question and more in this complete guide.
How Much Does Polyaspartic Floor Coating Cost?
Polyaspartic floor coating typically costs $4–$9 per square foot. The average 2-car garage measures 360 square feet. So, the cost to coat the floors of an average-sized garage would range from $1,440 to $3,240.
Why such a large range? The exact cost depends on whether you pay for a professional installation or try to DIY your concrete floor coating. You may be tempted to try a DIY job if you want to save money.
However, the chemicals in garage and patio floor coating products can negatively impact your health. You need the right equipment and disposal methods prepared before getting started.
Additionally, DIY installations can lower the quality of the product. Professionals also have the skills and expertise to prevent problems from poor application, such as peeling, air bubbles, and moisture buildup.
Is Polyaspartic More Expensive Than Epoxy?
Yes, polyaspartic coatings can be slightly more expensive than epoxy, but the added cost is more than worth it. Yet, some epoxy floors can cost more. The cost per square foot ranges between $3 and $12, with an average of $7.15.
Polyaspartic is a newer coating technology than epoxy. Manufacturers created this coating technology to improve upon some of epoxy coatings’ major weaknesses. That gives polyaspartic the following advantages:
- Polyaspartic is up to 20 times stronger than epoxy-coated floors
- Polyaspartic is 100% UV resistant
- Polyaspartic does not yellow, fade, or lose its color with time
- Polyaspartic is resistant to common garage and household chemicals
- Polyaspartic can be applied year-round and in most temperature conditions
- Polyaspartic cures up to 138 times faster than epoxy
- Polyaspartic coatings are seamless and non-porous
- Polyaspartic is water-resistant
- Polyaspartic is up to 100 times more flexible than epoxy
The one advantage epoxy may have over polyaspartic is that you can easily DIY the former. But you get what you pay for when it comes to garage floor coating products. Epoxy will never look as aesthetically pleasing as polyaspartic, nor will it protect your floor as well.
Plus, polyaspartic coating lasts far longer than garage epoxy. The slightly higher cost makes sense in the long run because you won’t have to replace your floor coatings as often (or even at all).
How Long Does Polyaspartic Floor Coating Last?
Polyaspartic floor coating can last for DECADES. The exact longevity of your garage floors will depend on factors like traffic, maintenance, and whether you DIY it or hire a professional.
This is yet another reason to consider calling a local floor installation company. Professional installation can greatly increase the lifetime of your garage floors. That will also save you money in the long run (more on this next).
Epoxy-coated garage floors, on the other hand, only last for up to 10 years. It is more common for epoxy to stay intact for around five years, though.
One of the primary reasons people choose epoxy over polyaspartic coating is the cost. Yet, as we will discuss next, the durability and longevity of polyaspartic make it a smarter long-term investment.
Are Polyaspartic Garage Floors Worth It?
Polyaspartic garage floors are more than worth it, especially compared to cheaper epoxy floor coating. What do we mean? The annual cost for your garage floors goes down the longer they last.
In other words, say you have an average-sized 360-square-foot garage. On the high end, getting polyaspartic coating for your floors will cost around $3,000. The average epoxy-coated garage floor will cost a little less, at around $2,500.
With epoxy, you’ll have to pay for concrete floor resurfacing in less than a decade. That means you will pay about $250 per year for epoxy-coated garage floors.
Polyaspartic would have a much lower annual cost since it lasts longer. If your floors last for 50 years, they would only cost $60 per year for the average-sized garage.
What Are the Disadvantages of Polyaspartic Coating?
There are relatively few disadvantages to polyaspartic coating. And the disadvantages this product does present are easily addressed when you hire a professional to install your floors. These include:
- Training is necessary to avoid uneven application
- Higher costs for polyurea and polyaspartic products vs. epoxy
The only significant problem with polyaspartic coating is that it can make floors slippery if they get wet. That is why many of our customers prefer a full chip system for their garage floors.
Decorative chipping is the addition of layers of colored resins. Chips can greatly improve traction for your feet and car tires. They can also increase the durability of your garage floors even further.
Garage Force: Where to Buy ‘Polyaspartic Floor Coating Near Me’
So, how much does polyaspartic floor coating cost? It costs $4–$9 per square foot, $1,440–$3240 for the average-sized garage, or around $60 per year for a high-quality and extremely durable concrete coating that can last for decades.
Are you searching for flooring pros that specialize in polyaspartic garage floor coatings? Garage Force locations in 36 states. Find a location near you today, or give us a call for a custom garage flooring quote.